Field
Description
•
5 .:-
•
5
Location
Only for Phone Type =
5
Select the location of the telephone. You define location in the
VoIP->Settings->Locations menu. Depending on the setting in
this menu, default behaviour for registration of VoIP subscribers
for which no location should be defined is displayed for selec-
tion.
Possible values:
•
" = $-$3 -$
: No loc-
ation is defined. According to set default behaviour, the sub-
criber is nevertheless registered.
•
" = " -$
: No location is
defined. According to set default behaviour, the subscriber is
not registered.
•
" = -$ = $ 5$6 "
> $E- '<
: No location is defined. According to set de-
fault behaviour, the subscriber is only registered if located in a
private network.
•
B8 3 C
: A defined location is selected. The subscriber
is only registered if at this location.
Interface
Only for Phone Type =
!" / .
Displays the interface to which the terminal is connected. If the
interface is configured, the system automatically reads out the
type. The field can then no longer be edited if a telephone is
connected.
Possible values:
•
"
•
B$=3 - C
Serial Number
Displays the serial number of the device. If the interface is con-
figured, the system automatically reads out the serial number.
This field cannot be subsequently edited.
Fields in the menu Number Settings
15 Terminals
bintec elmeg GmbH
224
elmeg hybird 120 / hybird 130
