The menu Applications->Doorcom Units->Doorcom Units->New consists of the follow-
ing fields:
Fields in the Basic Settings menu.
Field
Description
Interface
Select the interface to which an intercom adapter shall be con-
nected. All free FXS interfaces are available.
Internal Number
Select the configured internal number to be assigned to the in-
tercom adapter. The number is created in the
Numbering->User Settings->User menu.
Code for Doorcom Call
Acceptance
Pressing a bell button on the intercom sets off a call in the sys-
tem. To establish a connection between a called subscriber and
the intercom adapter, that subscriber must pick up the receiver
and dial the code number for call acceptance. Enter this code
for call acceptance. If a subscriber accepts a call from the inter-
com adapter, the PABX automatically dials the code number re-
quired to set up the connection. The subscriber need not make
any more entries.
17.7.2 Doorcom Signalling
In the Applications->Doorcom Units->Doorcom Signalling you configure the signalling
variant for call acceptance via a intercom adapter. Two intercom call options are available.
The code number for the bell button is the number the intercom adapter dials into the sys-
tem when the bell button is pressed. You can perform an internal call allocation for each
bell button. Please note that guidelines for connecting the intercom adapter depend on the
respective manufacturer. For this, read the operating instructions provided by the manufac-
turer of the intercom adapter.
17.7.2.1 General
In the General area you set up the basic features of intercom signalling.
bintec elmeg GmbH
17 Applications
elmeg hybird 120 / hybird 130
309
