sists of the following fields:
Fields in the Basic Settings menu.
Field
Description
Assignment
Select where pressing of the bell button shall be signalled.
Possible values:
•
$
: Signalling occurs on an internal number.
•
#$
: Signalling occurs to an external number.
Internal Assignment
Select the internal numbers on which pressing of the door bell
shall be signalled. With Add you add an internal number.
External Assignment
Enter the external telephone number to which pressing the door
bell shall be signalled.
Signalling
You can call the internal number with a broadcast call.
Possible values:
•
: :-
(default value): All assigned terminals are
called simultaneously. If a telephone is busy, call waiting can
be used.
•
8$
: All assigned terminals are called in the sequence of
their entry in configuration. If a terminal is engaged, the next
free terminal is called. The call is signalled ca. 15 seconds per
subscriber. The period can be set between 1 and 99 seconds
(per bell) in the configuration. If subscribers are on the phone
or logged out, there is not forwarding time for these.
•
: This call is a special case of the linear call. After
all terminals are called, call signalling begins again with the
first entered terminal. The call is signalled until the caller re-
places the receiver or the call is ended by the intercom ad-
apter (after ca. 2 minutes).
•
: The terminals are called in the sequence of their
entry in the configuration subscriber list. Every terminal that
has already been called is called again, until all entered ter-
minals are called. In the configuration, you can define when
each next terminal is called.
•
8$0 : :- " .<
: You have set lin-
ear for the door intercom call. After the defined time has run
out, you can also set in the configuration that all team sub-
17 Applications
bintec elmeg GmbH
312
elmeg hybird 120 / hybird 130
