Field
Description
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
MAC Address
Enter a MAC address for the internal router interface of ATM
connection, e.g.
&&=&+&;=&
. An entry is only re-
quired in special cases.
For Internet connections, it is sufficient to select the option Use
built-in (standard setting). An address is used which is derived
from the MAC address of the
.
DHCP MAC Address
Only for Address Mode =
!(5
Enter the MAC address of the internal router interface of ATM
connection, e.g.
&&=&+&;=&
.
If your provider has assigned you an MAC address for DHCP,
enter this here.
You can also select the Use built-in option (default setting) An
address is used which is derived from the MAC address of the
.
DHCP Hostname
Only for Address Mode =
!(5
If necessary, enter the host name registered with the provider to
be used by your device for DHCP requests.
The maximum length of the entry is 45 characters.
Fields in menu Routed Protocols over ATM Settings (appears only for Type = Routed
Protocols over ATM)
Field
Description
IP Address/Netmask
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interface. Add new entries
with Add.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is enabled with
;
.
bintec elmeg GmbH
22 WAN
elmeg hybird 120 / hybird 130
453
