Field
Description
This cancels all settings made during the IPSec configuration.
Once the configuration is deleted, you can start with a com-
pletely new IPSec configuration.
You can only delete the configuration if Enable IPSec = not ac-
tivated.
IPSec Debug Level
Select the priority of the syslog messages of the IPSec subsys-
tem to be recorded internally.
Possible values:
•
$3<
(highest priority)
•
$
•
$3
•
$$ $
•
A$
•
" 3
•
= $
•
!;:
(default value, lowest priority)
Syslog messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level "debug".
The Advanced Settings menu is for adapting certain functions and features to the special
requirements of your environment, i.e. mostly interoperability flags are set. The default val-
ues are globally valid and enable your system to work correctly to other bintec elmeg
devices, so that you only need to change these values if the remote terminal is a third-party
product or you know special settings are necessary. These may be needed, for example, if
the remote end operates with older IPSec implementations.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
Description
IPSec over TCP
Determine whether IPSec over TCP is to be used.
IPSec over TCP is based on NCP pathfinder technology. This
technology insures that data traffic (IKE, ESP, AH) between
peers is integrated into a pseudo HTTPS session.
23 VPN
bintec elmeg GmbH
498
elmeg hybird 120 / hybird 130
