Login sequence at the Hotspot server
• When a new user connects with the Hotspot, he/she is automatically assigned an IP ad-
dress via DHCP.
• As soon as he attempts to access any Internet site with a browser, the user is redirected
to the home/login page.
• After the user has entered the registration data (user/password), these are sent to the
central RADIUS server (Hotspot server) as RADIUS registration.
• Following successful registration, the gateway opens Internet access.
• For each user, the gateway sends regular additional information to the RADIUS server
for recording accounting data.
• When the ticket expires, the user is automatically logged off and again redirected to the
home/login page.
Requirements
To operate a Hotspot, the customer requires:
• a bintec elmeg device as hotspot gateway with active Internet access and configured hot-
spot server entries for login and accounting (see menu System Management->Remote
Authentication->RADIUS->New with Group Description
=: $ :.
)
• bintec elmeg Hotspot hosting (article number 5510000198)
• Access data
• Documentation
• Software licensing
Please note that you must first activate the licence.
Go to
www.bintec-elmeg.com
then Service/Support -> Services -> Online Services.
- Enter the required data (please note the relevant explanations on the license sheet),
and follow the instructions of the online licensing.
- You then receive the Hotspot server's login data.
Note
Activation may require 2-3 business days.
Access data for gateway configuration
bintec elmeg GmbH
25 Local Services
elmeg hybird 120 / hybird 130
591
