Motorized/Smart Zebra Shades
Instruction Manual
P2
BINTRONIC ENTERPRISE CO., LTD
No.62, Bengong 5th Rd., Gangshan Dist., Kaohsiung City 82059, Taiwan (R.O.C.)
Email: sales@bintronic.com
This instruction manual version is v1.0.
All Rights Reserved.
Copyright © 2022 Bintronic Enterprise
1-2 Setting or modifying position of Lower-Limit
STEP-1
STEP-3
When the pre-determined position is reached, press [STOP] key once to stop the movement; press any
of the keys [UPWARD LIGHT FILTERING] or [DOWNWARD LIGHT FILTERING] + [SET] to confirm;
the setting is completed when Motor makes a twitch.
STEP-1
STEP-3
When the pre-determined position is reached, press [STOP]
key once to stop the movement; press any of the keys
[UPWARD LIGHT FILTERING] or [DOWNWARD LIGHT
FILTERING] + [SET] to confirm; the setting is completed
when Motor makes a twitch.
STEP-1
STEP-1
Press [SET] + [DOWN] keys until Motor makes a twitch,
indicating that the setting mode of Lower-Limit is activated.
STEP-1
STEP-2
Press [UP] or [DOWN] key to move the Zebra Shade to a
pre-determined position, to be set as the Lower-Limit.
The motor makes a twitch.
press [STOP]
press 1 of the keys + [SET]
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
When all procedures are done, the Upper-Limit
setting is completed, too. And the setting of
Lower-Limit has been cleared as well.
back
the Motor will make a twitch
reach to the Lower-Limit
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
Tap to fine tune. Press for 2 seconds,
and it will move continuously.
When entering the Lower-Limit position
setting mode, the mode will be deactivated if
no keys are pressed within 5 seconds. Plus,
previous setting will not be recorded. Please
go back to STEP-1 and reset it.
The motor makes a twitch.
press [STOP]
press 1 of the keys + [SET]
Setting Completed
When all procedures are done, the
Lower-Limit setting is completed, too.
CAUTION
Setting Completed
