Motorized/Smart Zebra Shades
Instruction Manual
P4
BINTRONIC ENTERPRISE CO., LTD
No.62, Bengong 5th Rd., Gangshan Dist., Kaohsiung City 82059, Taiwan (R.O.C.)
Email: sales@bintronic.com
This instruction manual version is v1.0.
All Rights Reserved.
Copyright © 2022 Bintronic Enterprise
STEP-1
STEP-2
Now press [STOP] key of the Remote Control to be added; the adding
process is completed when the Motor makes a twitch.
When all procedures are done,
please do not press any key and
wait for 5 seconds until the
Motor makes a twitch, indicating
that the setting is completed.
STEP-1
STEP-1
Press and hold [SET] + [STOP] until the Motor makes a
twitch, indicating that the setting mode of Adding another
Remote Control Unit is activated.
2-1 Adding another Remote Control Unit
STEP-1
STEP-1
Press [SET] + [STOP] keys until the Motor makes a twitch,
indicating that the setting mode of Altering direction of
Zebra Shade is activated.
3-1 Alter direction of Zebra Shade
back
the Motor will make a twitch
the Motor will make a twitch
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
back
the Motor will make a twitch
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
STEP-1
STEP-2
Now press [UP] + [STOP] + [DOWN] keys all together, the Motor will
rotate in reverse direction; press [UP] + [STOP] + [DOWN] keys all
together again, the Motor will rotate in forward direction.
the Motor rotates in forward
direction for the 2
nd
time
When all procedures are done,
please do not press any key and
wait for 5 seconds until the
Motor makes a twitch, indicating
that the setting is completed.
Setting Completed
Setting Completed
the Motor rotates in reverse
direction for the 1
st
time
