8
_______
Due to the constructive features of the Microblaster Lab model, its use
_______
shall be restricted to laboratories, thus it is not indicated for intraoral
_______
procedures.
_______
The Dental Surgeon or the responsible professional are fully responsible
_______
for the product use, regarding the safety items, the environment, the
_______
operator's and the patient's personal protection, indications and contra-
_______
indications and side effects.
Bio-Art denies any responsibility for any damage caused by undue use
of Microblaster and in cases where the safety items described in this document
have not been complied with.
General and laboratory use:
The Use of personal protective equipment (PPE's) when working with
Bio-Art Microblaster is compulsory. Use protection goggles, gloves and breathing
mask when operating the equipment.
In addition to these EPI's and for cases when the work offers such
conditions, we recommend the use of the Bio-Art Bio-Chamber (suction
chamber).
Using Bio-Art Bio-Chamber
(suction chamber):
Bio-Art BIO-CHAMBER, (not included) is a complementary product for
use with Microblaster. Manufactured by Bio-art, it is an exhaustion chamber used
in the blasting processes with the purpose not to allow the excess of aluminum
oxide and the impurities generated in the blasting process to be launched to the
environment.
Bio-Art BIO-CHAMBER is provided with an exclusive exhaustion
system and a blasting chamber with high visibility and exclusively designed to
work with Microblaster, thus providing higher cleaning, speed, efficiency, safety
and practicality in the blasting processes
.
• Never point the ejecting needle (01) to any part of the body during the blasting
process.
• Use only abrasive of the type aluminum oxide.
10. WARNINGS
