9
Picture 5
First, keep the main body above the base stand. (picture 5), then align the bolt of base stand.
Mounting holes of the Main body at both sides, using Hexagon head bolt M10*55, flat washer 10,
Spring washer 10 insert through base stand and the side panel and make them stable.
g. Pick up the gas (water) tap from accessory kit, first, unscrew the tap and nut, find the Mounting
holes at the both side of cabinet glass. The Tap needs to be fixed as shown in the picture. The water
mouth of the Tap should be inside the cabinet
’
s operating zone, refer Picture 6, The other end of the
Tap which is having threading on the pipe should be inserted through the glass hole, the threaded
pipe should be fastened with washer and nut outside the glass and need to be tightened with a wrench.
Please refer the below picture to carry out the tap fixing to the cabinet. See picture 6 and 7.
