6
5
3 adjustment of heat sealing gap
3.1 Remove the heat sealer mask and the M3 screw next to the heat sealing head as the
gap adjustment screw. The instrument has been adjusted to the ideal state before leaving
the factory. Under normal circumstances, there is no need to adjust.
3.2 The method of adjusting the gap is as follows: the counterclockwise swirling gap
becomes smaller, and the heat sealing of the plastic tube after heat sealing becomes
thinner and relatively easy to break. The clockwise swirling gap becomes larger, and the
heat sealing of the plastic tube after heat sealing becomes thicker, which is relatively
difficult to break or needs to be cut.
3.3 When adjusting, the rotation should be no more than 1/8 turn.
4 Maintenance
4.1 In order to make the instrument work properly, the instrument must be placed in a
clean, dry, non-erosion environment and cleaned frequently. When not in use, turn off
the power and unplug the AC connector.
In order to understand the quality of our products and to provide better services to users,
please note:
Certification
Name
：
Blood Bag Tube Sealer
Model
：
BK-BTS1
The product is inspected to meet the technical standards and is
allowed to leave the factory.
