9
3.2.1 Select the runtime
After selecting the program in the program list, click " Select " under the menu of "Program Run" to
enter the program view interface as shown in Figure 3-3. Shows the detailed steps of the current
program, including the name of the step and the time of each run.
Figure 3-3
3.2.2 Program Run
After selecting the program in the program list, select "Run" under "Program Menu" to enter the
operation interface, as shown in Figure 3-4.
Figure 3-4
After clicking "Start", the program will start to run, the board temperature will be displayed as the
current temperature, the remaining time of the step will be displayed as the remaining time of the
current running step, and the total remaining time will be displayed as the remaining time of the