16
Figure 3-14
3.5 UV Operator
Select "UV Operator" in the main operation interface, as shown in Figure 3-15. Ultraviolet
disinfection time can be set on the left side, and click "Start" to countdown to start disinfection. At
the end of the time, the UV lamp will automatically turn off. You can also take the initiative to stop
the disinfection process and turn off the UV lamp.
Figure 3-15
Note:
1) During the disinfection of the ULTRAVIOLET lamp, please do not open the front safety door. If
the experimenter opens the safety door at this time, the ULTRAVIOLET lamp will automatically shut
down and the time will stop counting down. After closing the safety door, the timing will continue
until the end of the timing.
2) When the disinfection time is up, the system will automatically turn off the UV lamp, or the
