BioBolt evo3 Manual Download

Page: 7 / 15

Lock Operation

4.1 Unlocking Door with Fingerprint

To open with an enrolled fingerprint simply slide the cover up & place the
finger gently on the scanner.

NOTE: You will hear a beep & the motor retracting the bolt. Your
deadbolt is now unlocked.

NOTE: If the cover is already up: simply hit the # button to activate the
scanner.

PRESS:

8 Digit Pass Code

NOTE: Do not enter the 3 digit user ID

NOTE: You will hear a beep and the deadbolt will retract.

FIRST:

To open the lock from inside your home or business simply turn

the knob or push the Lock/Unlock button (above knob), if locked.

PRESS:

(Only * will Lock your Deadbolt from the outside, not a fingerprint)

4.2 Unlocking Door with a Pass Code

4.3 Locking/Unlocking Door from the Inside

4.4 Locking Door from the Outside

BioBolt

evo3 Biometric Deadbolt

http://www.bioboltlock.com | Intelligent Biometric Controls, Inc. | v1.1

Summary of Contents for evo3
















Search results

Summary of Contents for evo3

Reviews:

Related manuals for evo3

Brands by name

Popular brands

BioBolt evo3, Manual

Search results

Summary of Contents for evo3

Reviews:

Related manuals for evo3

Brands by name

Popular brands