FTH-711 Dual Vision Thermal Scanner
Page: 9 of 13
5. INSTALLATION
(1)
Remove the tripod from the storage box, and
setup to its maximum height.
(2)
Place the Dual Vision Thermal Camera onto the
tripod, carefully tightening the holding screw so
that it is firmly fixed to the tripod. Make sure the
camera is facing the monitoring area, being
flush with People’s height. The angle between
the camera and the channel shall be controlled
within 45° (The traffic area needs to be well lit)
(3)
Connect one end of HDMI cable to “Interface A” on
the camera/smart box rear, and the other end to the
provided LCD Monitor, or a television/monitor with
audio functions.
(4)
Connect the Thermal Camera’s power supply to a
wall socket, and the input end connects to “interface
B” on the camera/smart box rear
(5)
If using the provided LCD monitor, connect it to its
power supply and turn ON. The same if using and
external Television, turn ON and look for the HDMI
input that the camera is connected to.
B
A
A
LCD
Camera/smart
b
