8
Troubleshooting
My juicer
does not
operate when
the switch
is in the ON
position
1. Make sure the power cord is properly secured into
the power source and that the switch is turned to
the ‘ON’ position.
2. Check that the hopper is assembled correctly.
PLEASE NOTE
: If the hopper has not been securely
locked in place with the arrows aligning, the
appliance will not work for safety reasons. This
is due to a magnetic safety strip located inside
the hopper which must align with the matching
magnetic strip inside the base.
3. Check the appliance has been assembled
according to the instructions in this manual.
My juicer
has stopped
during
operation
If your juicer has stopped during operation, please
check that the hopper is correctly aligned with the
base. If the alignment shifts during operation the
juicer will simply turn off. Turn your juicer off, reset
the hopper and you should be able to continue.
The Synergy Slow Juicer has an automatic motor
cut off safety feature that will activate if the juicer is
overloaded. This has been designed to help prevent
accidental damage and to help extend the life of
the machine. To reset your juicer take off the Hopper
lid and remove any ingredients in the juice bowl.
If necessary switch the juicer into Reverse/REV to
unwind any fibre that is caught around the auger.
EN
