22 |
P a g e
Step 1
Press the Options Key
.
Step 2
Press 1 to set parameters.
Step 3
Use the left and right arrow keys to choose Rate
mode.
Press the down arrow key.
Step 4
Use the left and right arrow keys to change the
wavelength, or use the number keypad.
Press the down arrow key.
Step 5
If required enter a sample name. This name
followed by an incrementing sample number will be
used for naming subsequent results. Press the
down arrow key.
Step 6
Set this option to yes, if you need to measure many
different samples and assign different sample
names. The prompt will, by default, contain the
sample name last entered .
Press the down arrow key.
Step 7
Press ok
when all parameters have been
entered.
Rate
This application has a fixed 10 second interval. I twill keep collecting data until you manually stop it by pressing the C
button.
