Although the SRC offers advanced programming capability, it also features a "Quick-Start" func-
tion that allows the user to immediately begin cycling with factory preset default values serving
for the programmable system parameters.
Quick-Start operation is simple. Seat the user, adjust the seat forward and back position and foot
pedal straps as necessary, and proceed as described below:
1. Press <Power On> to power-up. After a brief self-test (which includes display of the current
software version,) the system beeps to signify that it is ready to begin collecting data.
2. Grasp the SRC fixed handlebars (or optional heart rate handgrips) and begin pedaling.
3. Use the <+> and <-> buttons to adjust effort level (#5 at bottom of the display).
To stop the system at any time, simply stop pedaling. All parameters will continue to display for
one minute before the system shuts off. If you want to turn the system off and automatically
reset the display, press <Power ON > again.
NOTE:
Standard SRC’s default to Constant Power Effort Control exercise mode. SRC Clinical Pro’s out-
fitted with retro-cycling default to Isokinetic exercise mode. A green LED on the display activates to show
the selected mode. To change modes, press <Select Exercise>(4) at the bottom of the display.
NOTE:
To provide heart rate monitoring (SRC Clinical Pro only), the subject must hold onto both heart
rate contact handgrips.
NOTE:
For the first 24 hours of operation, the SRC should be used with the AC Adapter.
3. QUICK-START OPERATION
QUICK-START OPERATIONS
— 8 —
Summary of Contents for 950-120
