Basic Harness application
attacHing Harness to overHeaD sUpport
Depending on patient support needs and the type of overhead system, the harness can be attached to either a single
point between the shoulders or to the two shoulder point attachments via a spreader bar. If using a rope based system,
excess rope can be placed in the pocket in the back of the harness.
www.biodex.com/harness
1. Place harness on patient and
tighten waist belt buckles.
2. Adjust length of shoulder straps by lifting up on the orange webbing or pulling
down on black webbing as needed to properly position waist belt around lower
trunk and keep shoulder pad in place.
Double shoulder point attachments for
use with spreader bar
Single point attachment
Rope pocket
