4
SECURITY LIGHT WITH MOTION SENSOR INSTALLATION
5
CONNECTING YOUR SYSTEM
The
Security Light with Motion Sensor
can be set to automatically turn on. Use
Hook
to angle in the direction
of where you want to detect motion of passerbys.
4.1
5.1
Return
Control Box
to secure position by sliding down over wall screws. Extend
Radio Antenna
above
Control Box
and
wrap around one of the Hanging Light or Solar Panel wires to secure.
5.2
Secure
Light Switch
of security light on inside wall using [2x] screws or nails.
4.2
Remove
Control Box
from wall by lifting up and away from wall screws. Connect 2
Hanging Lights
and
Solar Panel
cords to the ports in the back of the
Control Box
as shown.
x2
9
10
