Biometrics Direct – BioCert FS-100 Door Lock
Page 16
Fingerprint Authorization Operates Intermittently
·
Verify you are using the correct fingerprint.
·
Your fingerprint may not be suitable for authorization. Please register
a different fingerprint.
·
Replace the batteries. If this situation persists, please contact us for
technical support.
FP Undeletable
·
Verify you are using the correct “Master” fingerprint to authorize
deletion.
·
If this situation persists, please contact us for technical support.
Registration failure
·
Verify you are using the correct “Master” fingerprint to authorize
registration.
·
Make sure your fingerprint is placed correctly on the scanner.
·
Low Voltage – Replace system batteries
·
If this situation persists, please contact us for technical support.
FP cannot be matched when the system starts
·
Verify you are using the correct fingerprint to authorize entry.
·
Make sure your fingerprint is placed correctly on the scanner.
·
Low Voltage – Replace system batteries
·
If this situation persists, please contact us for technical support.
The handle cannot be released normally
·
Low Voltage – May not allow the system to release to the correct
position – Replace system batteries
·
If this situation persists, please contact us for technical support.
Caution - Please restrict the masters only to the persons who are actually
responsible for the access control. Do not to register any installation team
members or people who don’t need to be registered as a master.
