10/20 v2 03-13-2020
III
– BINDING METAFLY
Before your first use, you need to bind your MetaFly with
its transmitter.
Step1- Push the direction
Stick to the far right and
keep it while pushing the
power button
Step2- Release the
direction stick. The power
button should be flashing.
Step3- Switch MetaFly on
Both of the leds stopped
flashing. Your MetaFly and the controller are now bound.
IV - CHARGING METAFLY ON THE
TRANSMITTER
Turn on the power of the transmitter by pushing on the
power button. Then Insert MetaFly
’s connectors into the
charging slot of the transmitter.
The CHARGE indicator (green LED) is flashing and the
power button LED turns off: MetaFly is charging