![background image](http://html1.mh-extra.com/html/bionics/bfm-900l/bfm-900l_operation-manual_2754704009.webp)
FETAL MONITOR
(Ver 1.1)
10
Precautions for Use
Precautions for Use
11
BFM-900L
2.2 Precautions for Electric Safety
Before using the device, please check the items as follow:
Is the power supply line of the device proper? (100 - 240VAc).
Is every connection part (power line or any optional device) connected to the device properly?
For correct connection method, see the Chapter 4.
Is the device completely grounded?
(Otherwise, noise may be made.)
To avoid electrical noise or disturbance, install the device away from generators, X-ray devices,
broadcasting devices, and idle wires. Inaccurate reading may show in case above mentioned
devices are nearby. The BFM-900L requires a separate power source and stable connection.
Inaccurate reading may show in case these devices are sharing the same power line.
BFM-900L is classified as follows:
- This device is I type-BF grade device in terms of electric shock.
- It is improper to use this device nearby inflammable anesthetic and solvent.
- IEC/EN 60601-1 (Safety of Electric Medical Equipment) based noise making is A class.
IEC/EN 60601-1-2 (Electromagnetic Compatibility Requirements) based noise proof is B level.
Avoid areas near
chemicals or explosive gas
Do not disassemble it.
We WILL NOT be responsible under
any circumstances in this case.
Hold the plug to withdraw the
power cord.
Do not power it on before
completely installed.
Otherwise, it may be damaged.
Do not submerge the probe for
5 hours or longer.
Make sure to not let any dirt or
especially metallic objects from
going inside the equipment
Basic environments for use are as follow:
Temp : 10
℃
~ 45
℃
Pressure : 70 ~ 106 KPa
Humidity : 30% ~ 85%
Basic environments for storage are as follow:
Temp : -10
℃
~ 50
℃
Pressure : 70 ~ 106KPa
Humidity : 20% ~ 95%
IPX7
(DOP, UC Probes)
If you connect other devices to use RS-232C port, you should use the devices which are satisfied
with standard EN60601-1.