27
26
Performing a Blood Glucose Test
1. Hold the depth adjustable cap in one hand and hold the
base with the other hand. Bend the cap down. When a
gap appears between the cap and base, pull the cap
and base in opposite directions.
2. Pull off the depth adjustable cap.
3. Insert a new disposable lancet firmly into lancet carrier.
4. Twist off and set aside the protective cover of the
disposable lancet.
5. Replace the depth adjustable cap.
6. Choose a depth of penetration by rotating the top portion
of the depth adjustable cap until your desired setting is
visible in the window. Settings are based on skin type
" " for soft or thin skin; " " for average skin;
" " for thick or calloused skin.
1
2
3
4
5
6
Performing a Blood Glucose Test
7. Hold the base in one hand and pull on the plunger with
the other hand. The device will be cocked. Release the
plunger and it will automatically move back to its original
position near the base.
8. Wash your hands with warm soapy water and dry
thoroughly.
9. Take one
Blood Glucose Test Strip GS700
from the vial. Close the vial cap immediately.
10. Insert the strip into the test strip port of the
Blood Glucose Meter GM700S with the view window
facing up.
11. Once the strip is inserted, all symbols will appear on your
meter display and will be accompanied by a beep (if
volume is turned on).
TM
Rightest
TM
Rightest
7
8
NOTE
- The
will
automatically detect the Code number on the test
strip. You do not have to check the Code number on
the meter display and strip vial.
TM
Rightest
Blood Glucose Meter GM700S
9
10
11
GM700S
Summary of Contents for rightest GM700S
Page 2: ......
