31
30
Performing a Blood Glucose Test
7
8
11
NOTE
- RIGHTEST Blood Glucose Meter will automatically detect the Code
number on the test strip. You do not have to check the Code number
on the meter display and strip vial.
Performing a Blood Glucose Test
1. Wash your hands with warm soapy water and dry
thoroughly.
2. Hold the depth adjustable cap in one hand and hold the
hub in the other hand. Bend the cap towards the down
side, until a gap appears between the cap and hub.
3. Pull the cap and hub off in opposite directions, remove
the cap.
4. Insert a new disposable lancet firmly into lancet carrier.
5. Twist off and set aside the protective cover of the
disposable lancet.
6. Replace the depth adjustable cap.
1
3
4
5
6
2
7. The adjustable cap with 7 depth levels allows you to
select the depth of penetration by rotating the cap until the
preferable depth display in the window, Settings are
based on skin type.
" " for soft or thin skin; " " for average skin;
" " for thick or calloused skin.
8. Hold the base in one hand and pull on the plunger with
the other hand. The device will be cocked. Release the
plunger and it will automatically move back to its original
position near the base.
9. Take one RIGHTEST Max Blood Glucose Test Strip from
the vial. Close the vial cap immediately.
10. Insert the strip into the test strip port of RIGHTEST Max
Blood Glucose Meter with the view window facing up.
11. Once the strip is inserted, all symbols will appear on your
meter display and will be accompanied by a beep (if
volume is turned on).
10
9
Summary of Contents for RIGHTEST Max
Page 2: ......