38
NOTE
- The Average function requires that the correct time and date is set. Whenever the battery is
changed, the time has to be reset. Otherwise, the average function cannot work normally.
- The Average function requires that the correct time and date is set. Test results must exist
during the desired time interval. For example: To get a 14-days average on 1/30, you must
have test results dated between 1/17 and 1/30. If no test results exist during that time frame
you will not receive an average.
- The CS test result has been automatically removed from the average calculation but it is still
searchable in the Memory Mode. The CS test result will show with a blinking " " icon in
the Memory Mode.
- The " Lo ", " Hi " results, control solution test results and test results under abnormal
temperature < 6°C (43°F), > 44°C (111°F) will be excluded from average calculations.
Recalling Average Test Results
The RIGHTEST Max Blood Glucose Meter provides several average test results. View the 1-day,
7-days, 14-days, 30-days, 60-days and 90-days average test results for better blood glucose
monitoring.
1. Press the Main button to switch the screen to Average Mode.
2. On the average screen, use either the Up or Down button to view 1-day, 7-days, 14-days,
30-days, 60-days or 90-days averages.
3. The number shown in the lower right hand corner indicates how many test results have been
calculated.
Recalling Average Test Results
39
Summary of Contents for RIGHTEST Max
Page 2: ......