background image

26

About

   the
   alkaline

   ionized

   water

 

What kind of impact can the acidic water might

have on the skin?

The power can not be turned on, or is turned off in the 

middle of the use.

The power is turned off inadvertently in the middle of 

the use (Periodically On/Off repeatedly)

Once after [Strong alkaline], [Acidic] and [Purified 

water] is used, the indication will change into [Alkaline

What is the pH of the acidic water coming out 

of the acidic water outlet in the middle of the 

alkaline ionized water being used

●The human skin is mildly alkaline to pH 5.5. 

The alkaline water not only help keep the

acidity of the skin at an appropriate level, but also can 

help the contraction of skin pores to help keep the skin 

constantly elastic and moisturized.

 The pH value can be varied depending on the 

    quality of water and the water flow volume.

●Is the water flow volume insufficient? 

 (At least 0.5ℓ/Min. is required)

=> Open the water branch pipe and adjust the water flow 

volume.

●Is the electric cord appropriately inserted?

=> Insert the cord into the wall socket correctly.

●Is the fuse cut off? Check the fuse.

●After inserting the electric cord into the wall socket, you need 

to check whether a‘beeping’ sound is generated when pushing 

the  button lightly.

=> The beeping sound means that there are no problems with 

the fuse.
●It is because of the bimetallic safety system for the 

overheating inside the system in case of long hours of 

operation. When the temperature goes down after the 

water supply control value is turned off, you can turn on the 

valve for the use.

●When the water supply control valve is turned off once 

after [Strong alkaline], [Acidic] and [Purified water] is used, 

the setting will be restored to the previously set value of 

[Alkaline] automatically.

=> Not malfunctioning.

■You need to check the following items before requesting the repair work if you think the system is malfunctioning :

■You should not try to disassemble and repair the system. Contact the sales shop or the main office when the

system is malfunctioning.

 When there are abnormalities with the system because of your mishandling of the system, the electric plug needs 

to be disconnected. Afterwards, restart the system. The system will be restored to normal operation.

Q (Questions) 

A (Answers)

Selection level

Strong alkaline

pH10.0±0.5

pH4.0±0.5

Eliminate the

fishy smell after

cooking fiish

Clean the

tableware

pH4.0±1.0

Drinking, culinary

pH9.5±1.0

Alkaline

Drinking, Cook

pH9.0±1.0

Initial drinking

pH8.0±1.0

pH5.0±1.0

pH6.0±1.0

Purpose

Acidic water 

pH value`

■When the following lamps are  indicated.

Symptoms

Causes and actions

About After Sales Service

BTM-303D (영).indd   26

2016-08-31   오후 1:26:14

Summary of Contents for BTM-303D

































Reviews: