7
WEEE Directive
● Do not apply any different power voltage other than the indicated power voltage.
If not followed, fires or electric shocks can be caused.
● Do not use any other fuse with different capacity.
● Stop using the product immediately when any malfunctioning is found.
● Do not handle the electric plug or operate the power button with wet hands.
If not followed, electrical shocks can be caused.
● Should hold the electric plug when inserting it into the wall socket or removing it from the socket.
● Damage to the electric cord, fires or electrical shocks can be caused when if the cord is pulled.
● Clean the wall socket after removing the electric plug.
-When there are lots of dusts settled on it, fire can be caused.
● Do not connect multiple cords to one single wall socket.
When a wall socket is shared, abnormal heat can be generated, possibly causing a fire.
● Electrical shocks, short-circuiting, ignition of fires can be caused if a damaged electric cord or plug is used.
● Do not damage, process or forcibly wind or pull the electric cord.
-The cord can be damaged, possible leading to fires or electric shocks.
● Do not fix the electric cord by using a stapler.
-The cord can be damaged, possible leading to fires or electric shocks.
● Electric shocks can be caused if the product is dropped into water by mistake.
The following measures need to be taken.
Remove the electric plug from the wall socket.
Recover the product from the water.
Contact the sales shop or the main office for advice.
● Should not arbitrarily modify, disassemble or repair the product.
If not followed, fires and electric shocks can be caused.
The company will not be held responsible for any accidents generated from such activities.
-
Warning
-
Should be followed for your safety.
BTM-303D (영).indd 7
2016-08-31 오후 1:26:08
