PRODUCT SHEET
info@biopac.com
www.biopac.com
BIOPAC Hardware |
BioNomadix Series
| Page 11 - 26
Updated: 8.18.2020
BIONOMADIX ELECTRODE LEADS
All BioNomadix electrode leads use lightweight, insulated tinsel wire 1.25 mm OD with female mini-pinch clips
and squeeze lock connectors
2-LEAD BIONOMADIX ELECTRODES LEADS (also for biopotential Smart Amplifiers)
Lead wires:
2 (red and white)
Electrode clips: 2
Length:
BN-EL15-LEAD2: 15 cm, BN-EL30-LEAD2; 30 cm, BN-EL45-LEAD2; 45 cm
Interface:
Secondary channel lead
for the following BioNomadix Transmitters: BN-ECG2, BN-
EEG2, BN-EGG2, BN-EMG2, BN-EOG2, (
first channel lead
should be a BN-ELxx-
LEAD3 three lead set to establish ground).
Do not use for EDA or NICO!
2-LEAD FOR NICO
– BN-EL50-LEAD2
Lead wires:
2 (insulated leads black)
Electrode clips: 2 (alligator clips with teeth)
Length:
50 cm
Interface:
NICO CH A or CH B
To eliminate redundant ground leads for biopotentials, use 3-lead for primary
input and 2-lead for secondary input for each BioNomadix unit.
3-LEAD BIONOMADIX ELECTRODES LEADS (also for biopotential Smart Amplifiers)
Lead wires:
3 (red, white, and black)
Electrode clips: 3
Length:
BN-EL15-LEAD3; 15 cm, BN-EL30-LEAD3; 30 cm, BN-EL45-LEAD3; 45 cm
Interface:
Primary and secondary channel lead for the following BioNomadix Transmitters: BN-ECG2,
BN-EEG2, BN-EGG2, BN-EMG2, BN-EOG2.
Do not use for EDA or NICO!
4-LEAD BIONOMADIX ELECTRODE LEADS
Leads:
4 (red x 2 and white x 2)
Electrode clips: 4
Length:
BN-EL50-LEAD4; 50 cm
Interface:
designed for BN-NICO: CH A or CH B (can be used
with other BioNomadix biopotential transmitters)
Connection:
See diagram (right) for BN-EL50-LEAD4 leads and
EL500 paired spot electrodes.
EDA BIONOMADIX ELECTRODE LEADS
(also for Smart Amplifier EDA100D)
Leads:
2 (red and black)
Electrode clips: 2
Length:
BN-EDA-LEAD2; 15 cm, BN-EDA25-LEAD2; 25 cm
Interface:
Only use in CH B EDA on wireless BioNomadix
Transmitter BN-PPGED
BIONOMADIX TO TOUCHPROOF ADAPTERS
Leads:
2 (red and white, BN-ADAPT-2)
or
3 (red, white and black, BN-ADAPT-3)
Electrode clips: 2 (BN-ADAPT-2)
or
3 (BN-ADAPT-3)
Length:
10 cm
Interface:
Use these adapters to connect 1.5 mm Touchproof electrodes to a BioNomadix transmitter.
