./4%
You should see the memory count down on the BP monitor as its
downloading the measurements to the APP. If there are no measurements this will not happen.
8. Once the memory download is complete, you can take your measurement. When the measurement is completed
the monitor will sync with the APP automatically.
./4%&ORMOREINFORMATIONONTHE!00ANDHOWTOUSEITVISITOURWEBSITEWWWBIOSMEDICALCOM
ORCALLOUR")/3-EDICAL(OTLINE
-EMORY2ECALL
This blood pressure monitor automatically stores 90 measurements for each user in its memory. The 90
MEMORIESARESPLITBETWEENTHETWOMODESMEMORIESIN$-ODEANDMEMORIESIN'ENERAL-ODE4HE
oldest record will be replaced by the latest measurement value when there are more than 90 sets for each user.
!2ECALLING-EMORYIN'ENERAL-ODE
First select General Mode, then press the “
-
“ button to see the most recent measurement value. Subsequent
measurements can be displayed one after the other by continuously pressing the “
-
“ or “
+
”button.
7D mode General mode
7D mode General mode
7D mode General mode
"2ECALLING-EMORYIN$-ODE
First select 7D Mode, then press the “
+
” or “
-
“ button.
A. If the Protocol was done correctly, the monitor will display “
”, meaning all 28 measurements have
been saved in the memory, and then display the Average Measurement as per the Protocol software. In the
Average Measurement screen the date will display the second day the Protocol measurements were started
and then change to the 7
th
day the Protocol measurements ended.
&OREXAMPLE
If the first day of measurements are started on October 10th and ends 7 days later on October
17th, the date will appear as 10
M
11
D
then change to 10
M
17
D
and back and forth . 10
M
11
D
will display instead
of 10
M
10
D
because the Protocol disregards the first day of measurements and averages the last 6 days of
measurements. See section 3.4 for more explanation.
Press the “
+
” or “
-
“ button to display the subsequent measurements.
7D mode General mode
7D mode General mode
7D mode General mode
7D mode General mode
7D mode General mode
B. If the Protocol was done incorrectly or if any measurements were missed, the monitor will display “
”
then “
” then the average measurement and then display the subsequent measurements.
