biosignalsplux 820201205 User Manual Download

Page: 8 / 16

Accelerometer (ACC)

User Manual

8 of 16

Using the Accelerometer (ACC) Sensor with biosignalsplux &

OpenSignals

3.1.

Connecting the sensor to biosignalsplux Systems

3.1.1.

biosignalsplux 4-Channel Hubs

The

biosignalsplux ACC sensor

is compatible with all 4 analog input channels of the 4-channel

biosignalsplux

hub, but incompatible with the reference/ground port. Connect the sensor to an analog

input to use it with this device.

Figure 5: ACC compatible biosignalsplux channels (green checkmarks).

3.1.2.

biosignalsplux 8-Channel Hubs

The

biosignalsplux ACC sensor

is compatible with all 8 analog input channels of the 8-channel

biosignalsplux

hub, but incompatible with the reference/ground and digital I/O ports. Connect the

sensor to an analog input to use it with this device.

Figure 6: ACC compatible biosignalsplux channels (green checkmarks).

Summary of Contents for 820201205

















Search results

Summary of Contents for 820201205

Reviews:

Related manuals for 820201205

Brands by name

Popular brands

biosignalsplux 820201205, User Manual

Search results

Summary of Contents for 820201205

Reviews:

Related manuals for 820201205

Brands by name

Popular brands