Operation Manual BioSmart PV-WM v.029.1|03.2021|en
Page 20 of 24
BioSmart PV-WM Reader
Operation Manual
In the
Login
and
Password
fields, enter
username
and
password
. Installed by default:
Login:
root
;
Password:
bioroot
.
After successful
authorization pass on the “
Settings
” tab and enter the serial numbers of the BioSmart
PV-
WM readers in the corresponding fields “
Ethernet port 1
” and “
Ethernet port 2
Figure 14). The serial
number of each reader is given in the passport and on the reader back cover.
Then click
Save
.
Figure 14
–
Reader serial number recording
The controller will reboot and the readers indication will change to blue. This indication mode
indicates that the readers are ready for operation.
Procedure for Performing Product Application Tasks
To start using the reader, follow the steps:
connect the reader to the BioSmart UniPass controller via an Ethernet cable;
if
it’s
necessary, connect executive devices to the controller;
on the BioSmart UniPass controller select the working model (the reader operation mode in
accordance with the BioSmart UniPass controller operation manual);
make settings in the Biosmart-Studio v5 software (add employees, register biometric data,
assign access groups, etc. in accordance with the
Biosmart-Studio v5 User Manual
).
To pass identification by the palm veins pattern, place palm against the reader in accordance with
the recommendations (see Figure 15)
