Chapter2
BIOS Setup
2.4 Advanced Chipset Features
This section allows you to configure the system based on the specific features of the
installed chipset. This chipset manages bus speeds and access to system memory resources,
such as DRAM and the external cache. It also coordinates communications the PCI bus. It
must be stated that these items should never need to be altered. The default settings have
been chosen because they provide the best operating conditions for your system. The only
time you might consider making any changes would be if you discovered that data was
being lost while using your system.
Figure 4. Advanced Chipset Setup
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
Advanced Chipset Features
Onchip Device Control
Press Enter
Item Help
AGP device control
Press Enter
Bank 0/1 DRAM Timing
SDRAM 8/10 ns
Menu Level
Bank 2/3 DRAM Timing
SDRAM 8/10 ns
Bank 4/5 DRAM Timing
SDRAM 8/10 ns
SDRAM Cycle Length
3
DRAM Clock
Host CLK
P2C/C2P Concurrency
Disabled
Fast R-W Turn Around
Disabled
Video RAM Cacheable
Disabled
AGP-4X Mode
Enabled
K7 CLK_CTL Select
Default
PCT
#
2 Access
#
1 Retry
Enabled
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values F6 :Fail-Safe Defaults F7 : Optimized Defaults
Onchip Device Control
If you highlight the literal “Press Enter” next to the “Onchip Device Control”
label and then press the enter key, it will take you a submenu with the following
options:
OnChip Sound
The default setting of this item utilizes an onboard sound chip
for audio output. There is no need to buy and insert a sound
card. If sound card is installed, disable this item.
2-12