background image

Hi-Fi Z87W/Hi-Fi H87W/Hi-Fi B85W 

21 

4. An open dialog will show up to 

request your agreement to start the 
BIOS update. Click 

Yes

 to start the 

online update procedure. 

 

5. If there is a new BIOS version, the 

utility will ask you to download it. 
Click 

Yes

 to proceed.   

 

6. After the download is completed, 

you will be asked to program 
(update) the BIOS or not. Click 

Yes

 

to proceed. 

 

7. After the updating process is 

finished, you will be asked you to 
reboot the system. Click 

OK

 to 

reboot.

 

 

8. While the system boots up and the full screen logo shows up, press <DEL> key 

to enter BIOS setup. 
After entering the BIOS setup, please go to the 

Save & Exit

, using the 

Restore 

Defaults

 function to load Optimized Defaults, and select 

Save Changes and 

Reset 

to restart the computer. Then, the BIOS Update is completed. 

BIOS Update Utility (through a BIOS file) 

1.  Installing BIOS Update Utility from the DVD Driver. 
2.  Download the proper BIOS from 

http://www.biostar.com.tw/

 

3. Launch BIOS Update Utility and 

click the 

Update BIOS

 button on 

the main screen.

 

 

Summary of Contents for Hi-Fi B85W






























































Reviews: