60
Vcore Ripple Test(Open up the DOS Editor)
CPU
Athlon XP 2000+
M\B
VIF/1.0
CH1 STP
CLK CH3 Vcore
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
4.At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
5.Press <ESC> twice and then “Y” to exit the stpclk.bat program.
6.Type “EDIT” to enter the “EDIT” program. Press “Alt+F” to open up a
Pop-up menu.
7.Measure the Vcore waveform
Vcore Transient waveform
RESULT PASS
