Motherboard Manual
38
EX: This means V9 engine is activated.
<V3/V6/V9/V12/V15 Engine>
By clicking
,
the utility would over-clock the system
with certain fixed percentage. When the
V3/V6/V9/V12/V15 engine is activated,
you will see the green light bar on the left
rising to the top of the button.
This function is recommended for
any inexperienced users.
<Save/Load/Delete Setting>
You can save current setting to a file by clicking
, then a dialog as bellow
will show.
Enter file name and click “
Save
”, and then the current setting would be saved.
To load a previously saved file, click on
, and the saved files would show
as bellow. Click on the file name and then choose “
Yes
” to load the setting.
To delete a previously saved file; load the setting first
Æ
click on
(for VGA
setting is
)
Æ
choose “
Yes
”, and the setting file will be deleted.
(Be aware of that VGA setting for V-Ranger powered VGA card must be
saved/loaded/deleted respectively.)
Over-clock is an optional process but not a “must-do” process, and actual over-clock
result varies by every individual PC system. Therefore, we will neither guarantee any
over-clock performance nor be responsible for any system damage that may be caused
by over-clock. Any values or performance shown above are for reference only.
