Troubleshooting
Lamp Replacement
10
Issue
Solution
UV lamp(s) not lighting
1. Check all electrical connections.
2. Check that power is applied to power supply.
3. Check that the unit is turned ON.
4. Ensure the lamp cables are properly connected.
5. Install new UV lamp(s).
6. Consult BioZone.
UV lamp(s) flickering
1. UV lamp(s) have reached end of effective service life. Install
new lamp(s) of same type.
2. If unit is new, lamp connectors at both ends to ensure proper
connection.
3. If new lamps still flicker, consult BioZone.
UV lamps have burned
out prematurely
1. Consult factory.
Power supply will not
light UV lamp(s) even
after new lamps are
installed
1. Consult factory.
2. If power surges occur, an external power suppressor may be
needed.
BioZone Scientific lamps are rated for up
to two years of germicidal effectiveness
on CoilCare systems. The lamps will
continue to illuminate with a blue glow
after they have exceeded their rated
lifespan, however their germ-killing
effectiveness diminishes with time, so
they must be replaced on schedule for
the system to function properly.
Contact your local dealer for replacement
lamps.
Part Number
Part Details
CCX-10-H64000-1
1554mm lamp High Output, 1 Year
CCX-10-H48000-1
1148mm lamp High Output, 1 Year
CCX-10-H36000-1
842mm lamp High Output, 1 Year
CCX-10-H24000-1
610mm lamp High Output, 1 Year
CCX-10-H64000-2
1554mm lamp High Output, 2 Year
CCX-10-H48000-2
1148mm lamp High Output, 2 Year
CCX-10-H36000-2
842mm lamp High Output, 2 Year
CCX-10-H24000-2
610mm lamp High Output, 2 Year
CCX-10-64000-1
1554mm lamp, 1 Year
CCX-10-48000-1
1148mm lamp, 1 Year
CCX-10-36000-1
842mm lamp, 1 Year
CCX-10-24000-1
610mm lamp, 1 Year
CCX-10-64000-2
1554mm lamp, 2 Year
CCX-10-48000-2
1148mm lamp, 2 Year
CCX-10-36000-2
842mm lamp, 2 Year
CCX-10-24000-2
610mm lamp, 2 Year
Important! Use only authentic BioZone
replacement lamps. Use of replacement
lamps from other manufacturers will
immediately void the system warranty
and affect performance of the system.
