IMPORTANT!
• Qualified technicians should install this product
•
Install in accordance with relevant building codes
•
Read instructions carefully including safety warnings
WARNING
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR DISCONNECT
BEFORE SERVICING
CCX Parts
Thank you for purchasing BioZone Scientific’s
CoilCare
®
ultraviolet light germicidal irradiation
disinfection system for commercial HVAC applications. CoilCare can keep HVAC evaporator
coils clear of contamination and biofilm, allowing significant savings in maintenance and energy
costs, while improving indoor air quality. CoilCare works by irradiating coil surfaces in germicidal
ultraviolet light. The UV light inactivates microorganisms and breaks down organic residue,
preventing growth and keeping coils clean and operating efficiently. The system is equipped with
a UV lamp and a reflector to direct and focus UV light on the coil surface. The water-resistant
power supply is easy to mount and can withstand the humid environments of HVAC enclosures.
The quantity and positioning of UV lamp modules is determined by several factors, including the
coil dimensions and other HVAC system design specifications. Your BioZone Scientific commercial
UV specialist can help configure the best system for your application.
2
BioZone CoilCare systems must be installed by certified technicians only.
Installation of this product by anyone other than licensed HVAC or electrical
contractors voids warranty, and BioZone assumes zero liability.
A UV Lamp
B Lamp Connector
C Power Supply
D UV Warning Label
E Sight Glass
F Black Nylon Zip Ties
G Mounting Screws
Optional Parts
G UV Reflector
J Lamp Cable Extension 10ft
K Door Interlock Switch
L Contact Plates
M Control Box, Configurable
N Lamp Clip Pack
O Light Switch
