Magnetic Mounting
In situations where small coil surfaces require CoilCare® systems comprising single
UV lamps, the use of magnets fitted on L-brackets combined with EMT/conduit may be
indicated. The system is mounted to
surfaces perpendicular to the surface
to be irradiated, and L-brackets are
attached to the wall or support with
provided 30lb magnets for a quick
and easy installation.
Measure the distance between the
L-brackets and cut tubing 1” less
than distance between L-brackets.
Extend the tubing between the L-brackets and fasten at each end.
1.
INSTALLATION INSTRUCTIONS
5
2.
Optional vertical support adds strength to the tube framing and prevents sagging on
installations with two or more lamps per tubing length.
Measure the distance from floor to ceiling and cut tubing 7/8” less than floor to ceiling
height. Use pipe coupling to extend the vertical support between the floor and ceiling
for a snug fit.
Channel Strut
In situations where larger coil surfaces require CoilCare systems comprising several UV
lamps, the use of channel strut may be indicated. The system is mounted to surfaces
perpendicular to the surface to
be irradiated, and L-brackets are
attached to the wall or support with
self-tapping screws.
Measure the distance between the
L-brackets and cut channel strut
½” less than distance between
L-brackets. Extend the channel
strut between the L-brackets and
fasten at each end.
Optional vertical support adds strength to the strut framing and prevents sagging on
installations with two or more lamps per strut length.
Measure the distance from floor to ceiling and cut channel strut ½” less than floor to
ceiling height. Attach L-brackets at desired mounting points on floor and ceiling with
self-tapping screws. Extend the vertical support strut between the floor and ceiling
and fasten to L-brackets for a snug fit.
1.
2.
