LAMP
CONNECTOR
UV LAMP
PUSH FIRMLY
TOGETHER
Mount Power Supply (continued)
Use the supplied self-tapping sheet metal screws
to mount the power supply in place through the
mounting holes on the sides of the base.
It is recommended to use junction boxes, our
optional 3/4” or 1” cable strain relief, or other sealing
methods in order to pass the power cord and lamp
cables between the interior of the air handler and
exterior for connections, as needed.
INSTALLATION INSTRUCTIONS
7
1.
Connect Lamps and Cables
Arrange cables as needed for installation. If necessary
use the Optional 3/4” or 1” cable strain relief to pass
cables through cabinets, air system walls, etc.
Optional 10’ cable extensions are available for longer
runs.
When UV lamps, power supplies, and cables are
in place, join the UV lamp and lamp connectors by
aligning the electrical pins and corresponding slots
on the lamp connectors and pushing them firmly
together. Note that lamp connector may need to be
rotated to matchup with the lamp pins.
2.
2.
