background image

14

Coach Mode Control

Press the [PATTERN] and [TEMPO] buttons 
simultaneously to enter the coach mode. Both 
[PATTERN] and [TEMPO] LEDs light up.
The display will show:
In Coach mode, press the numbered buttons [1-5] to 
select one of the 5 Coach types.
There are 2 states in coach mode (except for Beat 
Check mode).
•  Preparation: adjust parameters, get ready to 

practice.

•  Practice: practice in the selected type.
Press the [START/STOP] button once and the 
module prepares itself to start practicing (except for 
the Beat Check type).
Press the [START/STOP] button again and the 
practice mode begins. Your hitting accuracy will be 
indicated by the 6 LEDs at the bottom of the drum 
module.

Judging your Timing accuracy by 
Indicators

GOOD (On the Beat)

If your hitting accuracy is right on the standard 
beat, both the [3] and [4] LEDs will flash green for a 
moment.

FAST (Before the Beat)

If your hitting accuracy is earlier than the standard 
beat, the [5] or [VARIATION] button's LED will flash 
red for a moment. You need to slow down.
1.  The [5] button's LED flashes to indicate that you 

were playing a little ahead of the standard beat.

2.  The [VARIATION] button's LED flashes to indicate 

that you were playing a lot ahead of the standard 
beat.

SLOW (After the Beat)

If your hitting accuracy is later than the standard 
beat, the [1] or [2] button's LED will flash red for a 
moment. You need to speed up.
1.  The [2] button's LED flashes to indicate that you 

were playing a little later than the standard beat.

2.  The [1] button's LED flashes to indicate that you 

were playing a lot later than the standard beat.

OUT OF BEAT

If none of the 6 LEDs flash, it means that you were 
playing out of beat, so you might need to practice 
more and try again to do better next time!

Summary of Contents for DDS1




































Reviews: