02
Assembling Your E-Scooter
Battery pack
faces the rider
1
2
1
2
3
4
5
1. Connect the
5
wires securely to their matching
color/port connections (otherwise the unit will NOT
turn on):
1
Blue single-pin connector
2
Yellow single-pin connector
3
Brown single-pin connector
4
Six-pin connector
5
Four-pin connector
2. Slide the handlebar post into the base (the battery
pack must be facing the rider). Install the
4
screws
halfway before tightening them completely:
1
From the front side of the post, the
two
screws
that come with washers should be used.
2
On the rider’s side of the post, align the
two
remaining long screws through the Riser Lock.
NOTE:
For the easy connection of wires, lay the base
of the unit and the handlebar’s post, next to
each other, on a flat surface.
