manualshive.com logo in svg

BIRD Site Analyzer SA-2000, Operating Instructions Manual

The BIRD Site Analyzer SA-2000 Operating Instructions Manual is available for free download on 88.208.23.73:8080. This comprehensive manual provides users with detailed instructions on how to set up and operate the SA-2000, ensuring optimal performance and accuracy in analyzing site signals. Download your manual today!

Share
Download
background image

vii

Fault Location Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Setting the Frequency Span  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the Cable Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Cable List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Setting the Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting Units  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting the Scale & Unit of Measure  . . . . . . . . . . . . . . . . . . . . . . . . 42

Auto Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting Units  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Limit Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Limit Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Marker Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Measurement Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Save and Recall  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Save Trace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Trace Label  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Trace Label Quicktext  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Trace Label Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Save Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Recall Trace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Recall Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Delete Trace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Delete Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Old Save and Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Save Trace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Label and Sort Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Save Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recall Trace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Recall Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Delete Trace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Delete Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Measure Power Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Connecting a Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Setting the Full Scale Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting the Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Recall Setups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Choosing the Displayed Measurement  . . . . . . . . . . . . . . . . . . . . . . 86
Setting Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Summary of Contents for Site Analyzer SA-2000





























































































































Reviews:

No comments

Related manuals for Site Analyzer SA-2000

Fluke MicroScanner Series User Manual preview
MicroScanner Series
Brand: Fluke Pages: 70
Fluke MicroScanner PoE Getting Started Manual preview
MicroScanner PoE
Brand: Fluke Pages: 156
Nexans BPI 144 Standard Installation And Cabling Manual preview
BPI 144 Standard
Brand: Nexans Pages: 8

Brands by name

Popular brands

Load more brands