Introduction
12
Velocity
1.
Select Velocity.
2.
Set speed value.
Note:
Manually enter cable velocity value or select the cable type
from the cable list.
Cable Loss
1.
Select CableLoss.
2.
Set cable loss values.
Note:
• Manually enter cable loss value or select the cable type from the cable
list.
• If manually entering the CableLoss (or Attenuation value), it must be
entered in dB/ft, or dB/meter. The manufacturer generally gives these
values as dB/100ft or dB/100meters.
Cable List
The Cable List contains known cable values for a variety of cable types. The
Cable List may be edited to add or delete cables. See
.
1.
Select CableList.
2.
Set cable type.
3.
Select a certain cable type.
Note:
Each cable type in the cable list has the fixed values for cable
velocity and cable loss. Selecting a cable from the cable list will
automatically populate the cable velocity and cable loss data fields.
