8
PTZ
Control
You are able to save and recall presets from the Web Dash-
board using the Select Preset option. To operate this,
simply press the Preset number you wish to recall or save
followed by APPLY PRESET or SAVE PRESET
Settings
The P400 communicates with the camera head via a serial
interface, these settings should remain as per default:
VISCA ADDRESS: 1
VISCA BAUDRATE: 9600
PT Max Speed
When controlling the P400 over NDI you can limit the
maximum speed of PTZ movements by affecting this
option, the higher the number (18) the faster and more
sensitive the movements will be on theP400.
OSD
In the initial release of P400 the OSD is very important for
adjusting the camera image settings since this is the
primary control mechanism. To adjust all cameras settings
please press the OSD ON/OFF button to illuminate the
OSD.
The OSD is visible on both the NDI output and SDI/HDMI
and can equally be accessed via the included remote
control.
Please take note that the PTZ will not operate normally
(control of movement) until the OSD menu is closed again.
EYES P400
