Glue wing in middle of fuselage under 90 degree to the fuselage or alternatively use nylon screws to
create a detachable wing.
Step 14
Connect the servos to a servo tester so that they are in the middle position and connect the control
horns so that they are vertical.
Step 15
Stick the supplied control rod trough the control rod guide on the side of the fuselage and stick the Z
bend trough the control horn on the tail. Use a marker to mark the control rod exactly at the servo
arm (hold elevator/ rudder in one line with vertical stabilizer/ horizontal stabilizer). Make a Z bend on
the mark and stick this trough the servo arm.
Step 16
Install receiver and program your radio.
Step 17
Install wheels with supplied shaft collars and install prop with rubber band.
Check before flight
Always do a range check with all new models
Stay away from airfields and highways
Stay away from crowded places
Stay away from building, animals, farms etc.
Stay away from powerlines
Make sure that all control surfaces move in the right direction and are mixed in the right way
