Safety Instructions
Safety Instructions
Warning : All types of Roller Shutter and
Sectional Overhead Doors are fitted with
counter balance spring mechanisms, which
are under considerable tension. Any
adjustment or repair MUST only be carried
out by trained and qualified BGID
installation engineers.
Warning : All types of Roller Shutter and
Sectional Overhead Doors are fitted with
counter balance spring mechanisms, which
are under considerable tension. Any
adjustment or repair MUST only be carried
out by trained and qualified BGID
installation engineers.
GENERAL
1. Only use opening & closing equipment supplied with the door
2. Keep opening clear of any obstacles when operating the door
3.
DO NOT
try to operate a damaged door – we recommend that you call BGID
Service Department, who will advise the best course of action
4.
DO NOT
lean obstacles against the door
5. Work carried out on electrical control equipment
MUST
be by a competent
electrician who
MUST
ensure the equipment is isolated prior to commencing any
work. BGID have fully trained electrical staff.
GENERAL CLEANING
Every month clean shutters down using a mild detergent i.e. warm soapy water.
Clean dust and dirt from inside facings and from guides. Lubricate moving parts.
