2
SHARP MOVING BAND TYPE SAW BLADE
TO AVOID SERIOUS PERSONAL INJURY
SAFETY TIPS
NEVER
Touch This Machine Without Training and Authorization By Your Supervisor.
ALWAYS
Read Operation and Parts Manual
BEFORE
Operating, Cleaning or Servicing.
ALWAYS
Keep Hands Clear of Sharp Band Type Saw Blade and Other Moving Parts.
ONLY
Use a Qualified Electrician to Install According to Local Building Codes: Machine
MUST
Be Properly Grounded.
ONLY
Install on Level, Non-Skid Surface in a Clean, Well-Lighted Work Area Away From
Children and Visitors.
DO NOT
Attempt to Operate This Machine Until it has Been Inspected and Demonstrated by
the Seller - Recognized
BIRO
Representative.
DO NOT
Alter or Modify This Machine in any Way From its Original Form. This Machine in
its Original Form Meets the Intent of O.S.H.A. Applicable Standards.
NEVER
Operate with Saw Guide Bar with Saw Guard in the Raised Position or the Saw Guard
Removed from the Saw Guide Bar.
ALWAYS
Adjust the Saw Guide Bar with Saw Guard to Within
½
” of Product to be Cut.
ALWAYS
Use Safety End Cut Pusher Plate for Smaller Products or The Last Cuts of Product.
DO NOT
Use This Machine for Non-Food Products.
DO NOT
Use This Machine to Cut Pigs Feet.
DO NOT
Wear Gloves While Operating.
ALWAYS
Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedure to
This Machine
BEFORE
Removing Shrouds, Removable Guards, Covers, Doors, Fences or
Panels for Cleaning, Servicing or Any Other Reason.
NEVER
Leave Machine Unattended While the Saw is Running.
PROMPTLY REPLACE
Any Worn or Illegible Warning Labels.
USE ONLY BIRO
Parts and Accessories Properly Installed.
