BIRO MINI-22, Operating Manual And Parts List

INSTALLATION

TO AVOID SERIOUS PERSONAL INJURY, PROPERLY INSTALL

EQUIPMENT IN ADEQUATE WORK AREA

ALWAYS Use Qualified Technician and Electrician for Installation. 

ONLY Operate on a Solid, Level, Non-Skid Surface.

NEVER Operate Machine With Product Mixer Safety Cover Opened or Removed or Safety Switch By-Passed.

ALWAYS Connect to Proper Voltage & Phase. 
ALWAYS Install Equipment in Work Area with Adequate Light and Space Away from Children and Visitors.

ALWAYS Lock Machine Casters After Moving Machine. 
NEVER Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.

NEVER Operate Without all Warning Labels Attached and Owner/Operator Manual Available to the 

Operator.

UNCRATING AND SET UP

1. Read this Manual thoroughly before installation and operation. 

Do not 

proceed with installation and     

    operation if you have any questions or do not understand anything in this Manual. Contact your local

    Distributor, or BIRO 

first.

2. Remove all banding, shipping carton, and all equipment from inside the tub. Then take machine off    

    shipping pallet. 

3. Install machine on a level, non-skid surface in a well-lighted work area away from children and 

    visitors.

4. This machine is complete except for knife and plate. There is a bowl shipping plug (cardboard) placed

    in the output end of the grinding bowl to retain the grinding auger during shipment. 

REMOVE THE 

    BOWL SHIPPING PLUG AND THE GRINDING AUGER.

5. After checking and making sure the power supply is correct, plug in your machine. 

NEVER OPERATE MACHINE WITH PRODUCT SAFETY COVER OPEN.

(Machine will not run with cover open or hopper removed.)

6. Machine must be properly grounded. Use qualified electrician to install according to local building     

    codes. 

3