7.3. Side part
In order to be able to get in and out more easily, both side
parts and the arm rests can be swung backwards. Operate
the locking lever using light finger pressure (Fig. 10) and
swing the side part backwards at the same time (Fig. 11).
Do not use the side parts to carry the
wheelchair!
To lock the side part, first swing it forwards and
allow it to click into place with light pressure on the arm-
rest
(Fig. 12).
When moving the side parts, ensure that no
items of clothing or other items can become jam-
med. Before use, check for firm attachment of the
side parts!
Combined side parts (only Pyro
Light)
The height of the armrest cushions can be adjusted in 6
steps by 70 mm. To do so, press the button and hold while
adjusting the height of the armrest (Fig. 13).
The armrest can be adjusted to two lengths (desk/full). To
do so, press the button on the side of the armrest cushion
and hold while adjusting the angled part to the desk or
full position (Fig. 14/15). The armrest locks into position
automatically on releasing the button.
7.4. Seat
Seat depth adjustment
You can adjust the seat depth of your wheelchair from 42
cm to 44 cm (Pyro Light) and from 44 cm to 46 cm (Pyro
Light XL) .
Fig. 10
Fig. 11
Fig. 12
Fig. 13
18
